介電擊穿強度試驗儀，絕緣漆漆膜擊穿強度試驗儀

介電強度擊穿電壓試驗儀，擊穿強度試驗儀， 電壓擊穿試驗儀， 絕緣材料擊穿電壓試驗儀，耐電壓擊穿強度試驗儀 介電擊穿強度試驗儀,耐電壓強度試驗儀

Dielectric strength tester breakdown voltage, breakdown strength tester, and breakdown voltage tester, insulation tester breakdown voltage, breakdown voltage resistance strength tester dielectric breakdown strength tester, voltage resistance strength tester

產品名稱：電壓擊穿試驗儀

Product name: breakdown voltage tester

產品型號：BDJC-50KV

Product model: BDJC - 50 kv

控制方式：微機控制

Control mode: microcomputer control

滿足標準：GB1408-2006 絕緣材料電氣強度試驗方法

Meet the standard: GB1408 2006 insulation dielectric strength test method

GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗

GB/T1695-2005 rubber power frequency voltage breakdown strength and voltage resistance strength test

GB/T3333 電纜紙工頻電壓擊穿試驗方法

GB/T3333 cable ZhiGong frequency voltage breakdown test method

HG/T 3330絕緣漆漆膜擊穿強度測定法

HG/T 3330 insulating varnish film breakdown strength measurement

GB12656 電容器紙工頻電壓擊穿試驗方法

GB12656 ZhiGong frequency capacitor voltage breakdown test method

ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.

ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test method.

一、電壓擊穿試驗儀 ，適用范圍及功能

One, the breakdown voltage tester, scope of application and function

電壓擊穿試驗儀, 主要適用于固體絕緣材料（如：塑料、橡膠、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等介質）在工頻電壓或直流電壓下?lián)舸姸群湍碗妷旱臏y試。

Breakdown voltage tester, mainly is suitable for the solid insulating material （such as plastic, rubber, thin film, resin, mica, ceramic, glass, insulating paint, etc.） under power frequency voltage or dc voltage breakdown strength and withstand voltage test.

電壓擊穿試驗儀,由電腦控制，通過我公司自主研發的全新智能數字集成電路系統與軟件控制系統兩部分來完成，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據。

Breakdown voltage tester, controlled by computer, through my company independent research and development of new inligent digital integrated circuit system and the software two parts to complete the control system, make the pressure rise rate really uniform and accurate, and can accuray measure the data of leakage current.

可實時動態繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，修改，打印試驗數據。

Can real-time dynamic test curve drawing, according to the test data, accurate, and can save, analysis, modify, print the test data.

1、本儀器在試驗過程中可對升壓擊穿過程繪制實時曲線，每次試驗的升壓曲線都由不同顏色構成，試驗結束后可疊加對比材料的試驗數據重復性。

1, the instrument in the test process for booster breakdown process real-time curve drawing, each test the pressure rise curve is made up of different color, after the test can be superimposed contrast material test data repeatability.

2、可以隨時調取當前及歷史試驗數據進行查看，編輯及修改實驗結果。

2, can at any time to view the current and historical test data to be obtained, edit and modify the results.

3、試驗過程中可以隨時修改試驗條件及存儲路徑及自動存儲試驗結果。

3, test conditions and storage paths can be modified at any time during the process of test and automatic storage test results.

4、試驗過程中，可隨時通過軟件決定本次試驗是否有效，方便篩選試驗結果。

4, during the trial, may at any time through the software to determine whether the test is valid, convenient screening test results.

5、可對軟件設置密碼，生成密碼保護，做到專機專人操作，避免無關人員誤操作。

5, can set the password to the software, password protection, do the special personnel operation, to avoid irrelevant personnel wrong operation.

6、 可對試驗結果編輯修改后打印，方便操作 更加人性化。

6, editor of the experimental results can be revised print, convenient operation more humanization.

7、可對一組試驗中曲線數據的試驗結果是否進行人為選定 。

7, the curve in a set of test data of test results are selected.

8、本儀器采用先進的無觸點原件勻速調壓方式，淘汰同類產品中機械傳動升壓方式。

8, the instrument adopts advanced non-contact original uniform regulation way, way out similar products in the mechanical transmission booster.

二、電壓擊穿試驗儀 ，技術要求：

Second, the breakdown voltage test instrument, technical requirements:

01、輸入電壓： 交流 220 V

01, input voltage, ac 220 V

02、輸出電壓： 交流 0--50 KV ;

02, output voltage: communication 0, 50 KV;

直流 0—50 KV

Dc 0, 50 KV

03、電器容量： 3KVA

03, electric capacity: 3 kva

04、高壓分級： 0-10KV，0--50KV，

04, high-pressure sizing: 0 to 10 kv, 0, 50 kv,

05、升壓速率：

05, pressure rise rate:

100V/S

100 v/S

200V/S

200 v/S

500 V/S

500 V/S

1000 V/S

1000 V/S

2000V/S

2000 v/S

3000V/S 等

3000 v/S, etc.

（備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）

（note: meet the standard requirements and can be set according to user requirements different pressure rise rate）

06、試驗方式：

06, test mode:

直流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗

Dc test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗

Ac test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

07、電壓擊穿試驗儀 ，試驗介質：空氣，試驗油

07, breakdown voltage tester, the test medium: air, test oil

08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。

08, installation high sensitivity of overcurrent protection device to ensure the sample breakdown when cut off the power supply within 0.05 S.

09、采用智能集成電路進行勻速升壓。

09, inligent integrated circuit is adopted to improve the pressure at a constant speed.

10、支持短時間內短路試驗要求。

10 short circuit test requirements, support for a short time.

11、電壓試驗精度： ≤ 1％。

11, voltage test accuracy: 1% or less.

12、試驗電壓連續可調： 0--50KV。

12, test voltage adjustable: 0, 50 kv.

13、電流可采集到m*。

13, current can be collected to mA.

14、出具*計量單位校準檢定證書或出具客戶計量單位的證書。

14, issued by national level measuring unit calibration verification certificate, or issue the certificate of customers specify the units of measurement.

15、電源：220V±10%的單相交流電壓和50Hz±1%的頻率。

15, power supply: 220 v + / - 10% of single-phase ac voltage and frequency of 50 hz + 1%.

16、電流電壓穩定度: 外界電源電壓波動10%時

16, current voltage stability: the power supply voltage fluctuations of 10%

三、 安全保護

3, safety protection

電壓擊穿試試驗儀器，電路保護控制：

Breakdown voltage test equipment, circuit protection control:

（1）超壓保護 （2）過流保護 （3）短路保護（4）漏電保護 （5）軟件誤操作保護

（1） the overpressure protection over-current protection （2） （3） short circuit protection （4） leakage protection misoperation （5） software protection

高壓輸入回路斷電保護控制：

High voltage power input circuit protection control:

（1）總電源開關 （2）調壓器復位開關 （3）高壓斷電開關

（1） the total power switch （2） voltage regulator reset switch （3） the high voltage power switch

（4）試驗箱門安全開關 （5）高壓回路開關 （6）漏電保護開關

（4） test the door safety switch （5） high pressure circuit switch （6） leakage protection switch

四、主要配置

Four, the main configuration

標準配置

The standard configuration

序號 名稱 配置 備注

Serial number name of the configuration notes

01 試驗主機 一臺

01 a test hosts

02 控制裝置 一套

02 a control device

03 試驗電極 二套（國標1408.1）

03 2 sets test electrode （1408.1 gb）

04 試驗油箱 二只

04 test two tank

05 放電系統 一套

A set of 5 discharge system

06 控制系統 一套

6 a set of control system

07 數據采集系統 一套

7 a set of data acquisition system

08 試驗軟件 一套 光盤

Test software is a set of CD

09 計算機 一套 品牌

09 computer a brand

10 噴墨打印機 一臺 品牌

10 a brand inkjet printer

11 產品使用說明書 一份

A 11 product instruction for use

12 計量證書 一份

12 a measurement certificate

13 產品合格證 一份

A 13 product certificate

四、電壓擊穿試驗儀,設備安全說明：

Fourth, the breakdown voltage test apparatus, equipment safety instructions:

1、設備要安裝單獨的保護地線。接保護地線，主要是減少試樣擊穿時對周?chē)a(chǎn)生的較強的電磁干擾。也可避免控制計算機失控。

1, the protection of the equipment to install a separate ground wire. Protection earthed, main is to reduce the sample breakdown of strong electromagnetic interference on around. Also can avoid the control computer is out of control.

2、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。

2, the test equipment is equipped with multiple protection circuit, mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc discharge test alarm, etc.

3、接地要求： 儀器需要單獨接地，接地附合國家標準要求，金屬棒深埋地下至少要1.5米以下。

3, grounding requirements: instrument need separate grounding, grounding conforms to the national standard requirements, the metal bar must be at least 1.5 meters deep underground.

4、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。

4, the test equipment is equipped with multiple protection circuit, mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc discharge test alarm, etc.

五、電壓擊穿試驗儀常規型號為：

Five, the breakdown voltage tester conventional models as follows:

BDJC-10KV

BDJC - 10 kv

BDJC-20KV

BDJC - 20 kv

BDJC-30KV

BDJC - 30 kv

BDJC-50KV

BDJC - 50 kv

BDJC-100KV

BDJC - 100 kv

北廣公司其它絕緣材料檢測儀器:

All other insulating materials testing instruments:

BDJC-0-100KV 介電擊穿試驗儀

BDJC - 0-100 - kv dielectric breakdown test instrument

BDJC系列絕緣材料工頻率介電擊穿試驗儀

BDJC series insulation work frequency dielectric breakdown test instrument

BDJC系列電壓介電強度試驗儀器

BDJC series voltage and dielectric strength test instrument

BDJC系列 電壓擊穿試驗儀

BDJC series breakdown voltage tester

BDJC系列絕緣漆漆膜擊穿強度試驗儀

BDJC series insulating varnish film breakdown strength tester

BDJC電容器紙工頻電壓擊穿試驗儀

BDJC ZhiGong frequency capacitor voltage breakdown test instrument

EST-121 體積表面電阻率測定儀

EST - 121 volume and surface resistivity meter

GDAT-A介質損耗測試儀/介電常數測試儀

GDAT - A dielectric constant dielectric loss tester/tester

GDAT-C新型介電常數介質損耗測試儀

GDAT - C new dielectric constant dielectric loss tester

BDH 耐漏電起痕試驗儀

BDH tracking resistance tester

BDH-B耐電弧試驗儀

BDH - B arc resistance tester

中國檢測行業與驗證服務的*者和智領者，幫助眾多檢測質檢單位和學校教研單位提供一站式的全面質量解決方案。

Testing industry in China and the tip of the validation service and wisdom, help many testing quality control unit and the quality of school teaching and research units to provide one-stop comprehensive solutions.

注重每一個細節是北廣公司對于每個客戶的承諾 ， 也是北廣公司一直追求的宗旨。北京北廣精儀儀器設備有限公司

Pay attention to every detail is this company for every customer commitment, is also the purpose of this company has been pursuing. Beijing all fine instrument equipment co., LTD